Configuring Groups - Honeywell HRHT4041 User Manual

•
Memo
•
User MAC
•
Group
•
Authority
4. Click Save to save your settings.
To edit a user account
1. Go to Main Menu  Setting  System  Account  User.
2. On the User tab, click the Modify icon of the user account that you want to edit. The
Modify User page opens.
3. On the Modify User page, you can change any of the following settings:
• Password
• User Name
• User Group
• User MAC
• Memo
• Authority (System, Playback, Monitor)
4. When you have finished making changes, click Save to save your settings.
To delete a user account
1. Go to Main Menu  Setting  System  Account  User.
2. On the User tab, click the Delete icon of the user account that you want to delete.
3. The message "Are you sure that you want to remove this?" appears. Click OK to delete the
account.
You can only delete an account that you have created. You cannot delete the
Note
admin and default user accounts.

Configuring Groups

To add a user group
Optionally, enter a brief description of the account.
Optionally, record the user's MAC address so that
user can only log in on a specific device on the
network. If this field is left blank, the user can log in
on any connected device on the network.
Assign the user to a group (admin, user, or another
group that you have defined).
Assign privileges by selecting or clearing check
boxes on the System, Playback, and Monitor tabs.
Note By default, the user group is set up to allow a
new user to monitor live video from all cameras,
play back recorded video from all cameras, control
PTZ cameras, view information, manually control
the DVR, back up files, and adjust color settings. To
assign additional privileges, change the user
settings on the Group tab.
Configuring System Settings
131