Performance Series HQA Digital Video Recorder Local User Guide
Figure 12-5
2.
On the Display tab, configure the following settings:
•
Time Display
•
Channel Display
•
Original Rate
•
Preview Enhancement
•
Transparency
•
Resolution
•
Video Spot
•
Preview Mode
3.
Click Apply to save your settings.
120
To display the current time in each channel window
in live view mode, select the check box. To hide the
time, clear the check box.
To display the camera name, status, and channel
number in each channel window, select the check
box. To hide the camera name, status, and channel
number, clear the check box.
Check to display the image in its actual
size/proportion.
To enhance the display image, select the check box.
To keep the default settings, clear the check box.
Set the transparency of the graphical user interface
(GUI) to a value between 0 and 100, with 0 being
totally opaque and 100 being totally transparent.
Set the resolution of your display.
Note You must restart the DVR for new display
resolution settings to take effect.
Click to enable Video Spot on a secondary monitor,
on which you can view video from selected cameras
or inputs.
Select Show Face List to see, on the right side of
the Live View image, all of the snapshots taken as a
result of face detection.