Storage; Waste Disposal And Environmental Protection; Spare Parts/Accessories; Technical Data - Grizzly EKS 1835-2 QTX Translation Of The Original Instructions For Use

GB

Storage

• Clean the equipment before putting it
away.
• Empty the oil tank before longer peri-
ods of non-use. Dispose of waste oil
environmentally correctly (see
disposal and environmental
• Put on saw bar protection
• Store the appliance in a dry place well
out of reach of children.
Waste disposal and
environmental protection
Do not dispose of used oil in the sewage
system or drains. Dispose of used oil in
an environmentally correct manner - bring
it to a waste disposal center.
Be environmentally friendly. Return the tool,
accessories and packaging to a recycling
centre when you have finished with them.
Machines do not belong with
domestic waste.
Empty the oil tank carefully and hand in
your electric chainsaw at a disposal cent-
er. The plastic and metal parts employed
can be separated out and thus recycled
use can be implemented. Ask our Service-
Center for details.
defective devices free of charge.

Spare Parts/Accessories

Spare parts and accessories can be ob-
tained at www.grizzly-service.eu
If you do not have internet access, please
contact the Service Centre via telephone
(see "Grizzly Service-Center"). Please
have the order number mentioned below
ready.
120
„Waste
protection").
sheath.
We dispose of your
Oregon saw chain.................... 3009 1530
Oregon chain bar ..................... 3010 0353
Bio chain oil 1 liter ................... 3023 0001
Bio chain oil 5 liter ................... 3023 0002
If further spare parts should be necessary,
please find the part number on the explod-
ed drawings.
The Oregon replacement saw
chain is to be used only in con-
junction with the associated
Oregon blade and the electric
chainsaw approved for this.
There is a risk of injury�

Technical Data

Electrical chainsaw ������ EKS 1835-2 QTX
Rated input voltage ..............230 V~, 50 Hz
Input power .................................... 1800 W
Safety class ...........................................
Protection type .................................... IP20
Chain speed ..................................14.0 m/s
Weight
without guide rail and chain ........... 4.1 kg
with guide rail and chain ................4.9 kg
Chain bar ...........Oregon Typ 140SDEA041
Chain ������������������������������Oregon 91P053X
Chain link separation .......3/8" (9.53 mm)
Chain width ................................1.27 mm
Teeth of the sprocket chain wheel .........7
Sawing length ........................max. 355 mm
Length of the chain bar ..................420 mm
Sound pressure level
(L ) ....................96.0 dB(A); K
pA
Sound power level (L
measured ........107.3 dB(A); K
guaranteed ...........................112.0 dB(A)
Vibration at the handle
(a ) ........................6.97 m/s
h
The stated vibration emission value was
measured in accordance with a standard
=3.0 dB
pA
)
WA
=3.0 dB
WA
; K=1.5 m/s²
2
II