Table 1-12 Ka 815/Ka 92 Antennas - Honeywell BENDIX KING KMH 880 System Installation Manual

B
1.5.3 Antennas
Full bearing coverage will be achieved by the use of a top and bottom directional
antenna system. The TAS Processor will also be capable of supporting a top
directional and bottom monopole antenna configuration. In the latter configuration,
only intruders being tracked via the top directional antenna will have bearing infor-
mation.
The antennas will be vertically polarized and cover 360 degrees in azimuth and at
least -10 to +20 degrees in elevation.
SYSTEM MANUFACTURER/
COMPONENT MODEL DESIGNER
Directional Bendix/King
Antenna KA 815
GPS Antenna Bendix/King
KA 92
Omni-Directional Dorne and Margolin
Antenna
* This antenna has not been tested for direct effects of lightning and the installer
must determine the suitability of the antenna for the specific installation.
CABLE TYPES AND PERMISSABLE GPS CABLE RUN LENGTHS
* R/G 142B/U
P/N 024-00002-0000
* R/G 400/U
P/N 024-00051-0060
* These cables use R/G 142/400 style connectors.
When using Non-KPN or Non-standard P/N cables, connectors etc., the installer has the responsibility of
proving airworthiness.
Rev 0, October/2000
DESCRIPTION
TAS Directional
Antenna
GPS Antenna
L-Band Antenna

Table 1-12 KA 815/KA 92 Antennas

(8dB allowable loss, including splitter.)
CABLE TYPE
Table 1-13 GPS Cable Run Lengths
10609I00.ZIPCDL
PART NUMBER
071-01599-0100
071-01553-0200
DM NI50-2-2*
CABLE RUN LENGTH
Up to 46 ft.
Up to 46 ft.
Note:
KMH 880/KTA 870
TSO
COMPLIANCE
TSO C147
TSO C129
TSO C66a
TSO C74
(W/O Splitter)
Page1-13