Viewing Current System Status - Honeywell BENDIX KING KMH 880 System Installation Manual

B B
B B
The second cable calibration summary could take as long as 2 minutes and 34
seconds before being displayed, due to the nature of the multi-tasking environment
of the TAS unit and the method by which tasks are delayed.
10

Viewing Current System Status

This option allows the user to view the current TAS unit system status without hav-
ing to try to read the LEDs located on the side or front of the TAS unit (see Figure
9). This data may be viewed two different ways; Overwrite or Continuously. The sta-
tus is updated every second or two. The system's status is indicated along with the
state of the LED indicator. When a fault occurs, a brief description is added to the
LED fault information. To stop the update, click the Stop button on the button bar.
In the Overwrite mode, the data is erased before each update. For the overwrite
mode, click Overwrite View on the Sys Status Menu. For continuously, click Con-
tinuous View on the Sys Status Menu.
____________________________________________________________________
Honeywell International Inc.
TAS Diag for Windows User Manual
Rev 0, October/2000
NOTE
Figure 9 System Status Window
10609I00.ZIPCDL
KMH 880/KTA 870
P/N 700-01055-0000
Revision-
Page 16 of 18
D-20