Honeywell BENDIX KING KMH 880 System Installation Manual page 193

B
Pass/Fail _____
Test the ABOVE/NORMAL/BELOW function as follows:
On the TAS Control Panel, set the ABOVE/NORMAL/BELOW
to ABOVE. On the traffic display screen, "ABOVE" should be
annunciated. Traffic between 2700 feet below and 8700 feet
above can be displayed.
Select BELOW. The screen should annunciate "BELOW" in
place of the "ABOVE" annunciation. Traffic between 8700
feet below and 2700 feet above can be displayed.
Set the switch to NORMAL. The screen area that annunciated
"ABOVE" or "BELOW" should be blank. Traffic between
2700 feet above and 2700 feet below can be displayed.
Traffic Display _____
On the traffic display, check the TAS ranges to observe the range
annunciations and range rings.
There are two configurations for the KMH 820/KTA 810, 3-5-10-15 and 5-10
-20-40. Not all ranges are available in every configuration.
The 2 nm range ring is visible on all TAS RANGE selections less than 20 nm.
Set TAS RANGE switch to 3 nautical miles. The following
properly scaled range rings should be visible:
2 and 3 nautical mile range rings.
Set TAS RANGE switch to 5 nautical miles. The following
properly scaled range rings should be visible:
2 and 5 nautical mile range rings.
Set TAS RANGE switch to 10 nautical miles. The following
properly scaled range rings should be visible:
Rev 0, October/2000
NOTE
NOTE
10609I00.ZIPCDL
KMH 880/KTA 870
______
______
Page 4-23