Category 4, Terrain Display Select - Honeywell BENDIX KING KMH 880 System Installation Manual

B
ID POSITION
INPUT
TYPE
0 0
1 1
2 2
3 3
4 4
The GPS Altitude Reference MSL or WGS-84 must be properly applied for the
appropriate GPS Position Type. At the time of release of this document, all GPS
sources except the Universal UNS-1 GPS are of the MSL type. The Universal
UNS-1 GPS (GPS-1000 engine in the UNS-1B+,-1C, -1D, -1k,and -1M) sources
are of WGS-84 type.
This configuration is only applicable to Honeywell Qualification Test Lab. When
this configuration is enabled on a 066-01175-2101 (EGPWS with internal GPS)
a software internal GPS monitor is activated for testing.

4.2.3.8.4 Category 4, Terrain Display Select

The following table has an identification number (ID) associated with each Terrain Display
configuration. Each of the ID rows has a group number for the Display configuration, the
Input Control and the output 429 bus. The TA&D Pop Up Disable function is defined by a
Boolean. See Table 4-10.
Page 4-8
DESCRIPTION
GPS, Internal GPS-PXPRESS RS-232
GPS, External RS-232 (GPS-PXPRESS
format)
GPS, ARINC 429 low speed, 743A format
GPS, ARINC 429 low speed, 743 format
GPS, ARINC 429 low speed, 743 format
(GPS Altitude referenced to WGS-84)
Table 4-4 Position Input Select
10609I00.ZIPCDL
GPS ALTITUDE
REFERENCE
NOTE 1
NOTE 2
KMH 880/KTA 870
EFFECTIVITY
App.
MSL -001
MSL -001
MSL -001
MSL -001
WGS-84 -001
Rev 0, October/2000
Cfg.
-001
-001
-001
-001
-001