Initialize Config Module - Honeywell BENDIX KING KMH 880 System Installation Manual

B B
B B

7.6 Initialize Config Module

This option sets the configuration module's strap data to default values. The user
must view both Strap Pages ( see Modify Strap Data ) to verify/modify the configura-
tion. The user may click the Cancel button at any time to end the initialization pro-
cess without actually writing to the configuration module.
When the Strap configuration is complete, click the OK button to save it to the con-
figuration module.
____________________________________________________________________
Honeywell International Inc.
TAS Diag for Windows User Manual
Rev 0, October/2000
Figure 6 Copy Binary File Window
10609I00.ZIPCDL
KMH 880/KTA 870
P/N 700-01055-0000
Revision-
Page 12 of 18
D-16