Introduction - Honeywell BENDIX KING KMH 880 System Installation Manual

B B
B B
1.

Introduction

The TAS Processor Field Diagnostics Program (TAS Diag) provides an interface to
the KMH 820/KTA 810 (TAS Processor Unit). The following information may be
retrieved from the TAS Unit via TAS Diag:
- I/O data (straps, attitude, altitude, etc.),
- TAS's internal Diagnostic and Log File,
- Configuration module straps,
- Currently tracked intruder data (range, altitude, bearing, etc.),
- Cable calibration data,
- Current system status (fault LED reading and description).
TAS Diag for Windows has four different diagnostic windows:
•
Main Diagnostic Window
•
IO Continuous Window
•
Intruder Data Window
•
System Status Window
All data may be written to a user-specified file by clicking Save from the File menu.
The active (selected) window will be saved.
A TAS Diag demonstration mode, in which no RS-232 communications are present,
is available for familiarizing the user with the program. Select Demo Mode from the
File menu.
This document is an operations manual for TAS Diag, providing tips and techniques
enabling TAS Diag to be a useful tool in installation and/or troubleshooting KMH
820/KTA 810 TAS P{rocessors.
The following Part Numbers identify the TAS Diag program and documentation:
700-01055-0000 User Manual (this documentation)
731-30007-0000 CD-ROM containing TAS Diag for Windows and User Manual
____________________________________________________________________
Honeywell International Inc.
TAS Diag for Windows User Manual
Rev 0, October/2000 10609I00.ZIPCDL
KMH 880/KTA 870
P/N 700-01055-0000
Revision-
Page 4 of 18
D-8