C H A P T E; Support For Usb Devices On The Cisco Ip Phone 8800 Series - Cisco IP Phone 7800 Series User Manual

Support for USB Devices on the Cisco IP Phone
8800 Series
If your 8800 Series phone has a USB port, you can use that port to charge your mobile device, a headset, or
a wired speaker.
•
•

Support for USB Devices on the Cisco IP Phone 8800 Series

The Cisco IP Phones 8851, 8851NR, 8861, 8865, and 8865NR have USB ports. The Cisco IP Phones 8851
and 8851NR have a single USB port on the side of the phone. The Cisco IP Phones 8861, 8865, and 8865NR
have a USB port on the side and a USB port on the back of the phone. As well, under the top accessory
connector cover on the right side of the phone there is another USB port.
Caution The USB ports must only be used for USB devices. Other objects can damage the phone and void the phone
warranty.
Each USB port supports a maximum of five USB devices. Each device connected to the port is included in
the maximum device count, including any key expansion modules.
For example, your phone can support five USB devices on the side port and five additional standard USB
devices on the back port. Many third-party USB products contain more than one USB device, and thus count
as more than one device.
You can use a USB port to connect:
• a wired or wireless headset (see
• a wired speaker
• a mobile phone or tablet to charge the device
Note
If you use a USB hub and remove the USB cable from the phone during an active call, your phone might
restart.
Cisco IP Phone 7800 and 8800 Series, Cisco IP Conference Phone 7832, and Cisco ATA 190-SC User Guide for Webex Calling (formerly Spark
Support for USB Devices on the Cisco IP Phone 8800 Series, on page 135
Mobile Device Charging, on page 136
C H A P T E R
Use a USB Headset with Your Phone (8800 Series), on page
34
143)
Call)
135