Devices Associated With Your Ata; Install Your New Ata - Cisco IP Phone 7800 Series User Manual

Devices Associated with Your ATA

Devices Associated with Your ATA

Use your ATA to connect these types of devices to your network:
• Analog phones
• Analog telephony voice devices
• Overhead paging systems
• Fax machines

Install Your New ATA

Your ATA comes with everything to power it up, connect it to the network, and set it up on your desk.
Before you begin
Before you begin the installation, make sure you have the following equipment:
• Ethernet cable to connect to your network.
• Analog phone or fax machine to connect to your ATA.
Cisco IP Phone 7800 and 8800 Series, Cisco IP Conference Phone 7832, and Cisco ATA 190-SC User Guide for Webex Calling (formerly Spark
Call)
50
• Analog phones have no softkeys.
• The information that analog phones display depends on the model you have.
• You use the phone's flash button for hold, resume, transfer, and conference.
• The ATA supports analog telephony voice devices, such as overhead paging adapters and answering
machines, that emulate a regular phone.
• Overhead paging systems provide alarms and public-address announcements in buildings.
• Analog overhead paging systems usually consist of a paging controller, paging amplifiers, and
paging speakers. Most analog paging controllers support a Foreign Exchange Office (FXO) interface
over an RJ-11 connector, and you can connect these devices to the ATA 190-SC.
Some paging amplifiers and paging speakers don't support the FXO interface, although they use
RJ-11 cabling for Class 2 wiring. Devices that don't support the FXO interface don't work with the
ATA 190-SC, even if they use an RJ-11 connector. Consult your paging equipment vendor for
information about FXO support.
• Use a fax machine directly with an ATA. Don't connect an extension to a fax machine, and don't
use the fax machine with a splitter.
• To reduce fax failures, use overseas mode, if available; if not, set the fax machine transmission
speed to low.
• Data devices, such as facsimile machines and modems, may not function optimally. For the best
fax and modem performance, continue to use a dedicated PSTN line.
Getting Started with Your New ATA