Complete Your Initial Setup In Cisco Webex Settings; Get An Activation Code - Cisco IP Phone 7800 Series User Manual

Getting Started with Your New ATA
• Phone cable to connect your phone.
• Uninterruptible power supply (UPS) to provide backup power.
Procedure
Step 1
Connect the network cable to your network and to the NETWORK port on the ATA.
Step 2 Connect the phone cable to the PHONE 1 port on the ATA and to your analog device (phone or fax machine).
Step 3
Connect the ATA power cable to the DC 5V POWER port on the ATA, and plug the power cable into your
power source.

Complete Your Initial Setup in Cisco Webex Settings

To get started, walk through a few short steps in Cisco Webex Settings. Accept the terms of service and verify
your emergency service address.
Before you begin
By default, your company's address is listed as your emergency service address. Change this value to the
address that you work from most often, such as the location of your home office or other remote site.
It's important that your emergency service address match the physical location of your device.
Procedure
Step 1 Click the get started link in your welcome email to open
Step 2
If prompted, set up a new password for your account.
Step 3 Accept the terms of service.
Step 4
Follow the on-screen instructions to set up your services.
a) Check the Don't show this page again check box so that the next time you sign in to
https://settings.webex.com, you're brought right to your call settings.
b) Select Personalize Settings.
Step 5 Follow the on-screen instructions to verify and, if needed, change your emergency service address.

Get an Activation Code

To use your device with Cisco Webex, you should have received an email that includes an activation code.
You need to enter this code the first time you sign in to your device. If you can't find the email or if the code
is already expired, you can create a new one.
If your device has a camera, you can either scan the QR code or enter the code manually. If your device doesn't
have a camera, you must enter the code manually.
Cisco IP Phone 7800 and 8800 Series, Cisco IP Conference Phone 7832, and Cisco ATA 190-SC User Guide for Webex Calling (formerly Spark

Complete Your Initial Setup in Cisco Webex Settings

https://settings.webex.com in your browser.
Call)
51