Cisco IP Phone 7800 Series User Manual page 207

Additional Information
Type
Cisco Webex Room, Board, and Desk
Devices
IP Phones (desk phones)
Cisco IP Phone 7800 and 8800 Series, Cisco IP Conference Phone 7832, and Cisco ATA 190-SC User Guide for Webex Calling (formerly Spark
Supported Devices and Applications for Cisco Webex Services
Supported Models
• Cisco Webex Room Kit Plus
• Cisco Webex Room Kit Plus Precision 60
• Cisco Webex Room Kit
• Cisco Webex Room 55
• Cisco Webex Room 70
• Cisco Webex Board 55
• Cisco Webex Board 70
• Cisco TelePresence SX20 Quick Set
• Cisco TelePresence SX10 Quick Set
• Cisco TelePresence SX80 Codec
• Cisco TelePresence MX200 G2
• Cisco TelePresence MX300 G2
• Cisco TelePresence MX700
• Cisco TelePresence MX800
• Cisco DX70
• Cisco Webex DX80
To activate your room or desk device on Cisco Webex, the device
must run software version CE8.3.4 or later.
Webex Board, which runs Webex Board OS, is an
Note
exception to this.
You must use a TRC6 remote control with the SX20. The TRC5
is not supported.
• Your Cisco IP Phone 7800 Series, on page 159
• Your Cisco IP Phone 8800 Series, on page 163
and 8831)
Webex Calling (formerly Spark Call) doesn't support
Note
devices with Multiplatform Firmware.
To activate your phone on Cisco Webex, the phone must run
software version 11.0 or later (Cisco Webex Phone OS).
To check which phone model you have, press Applications
and select Phone information. The Model number field shows
your phone model.
(except 8821
Call)
193