Ways To Provide Power To Your Phone; Your Desk Phone Button Layout On Webex Calling (Formerly Spark Call) - Cisco IP Phone 7800 Series User Manual

Ways to Provide Power to Your Phone

• Power over Ethernet (PoE), which your network supplies.
• Cisco IP Phone Power Injector.
• A PoE Power Cable and Power Cube 3.
The following figure shows the PoE and PoE power cable power options.
Figure 23: Conference Phone Power Options

Ways to Provide Power to Your Phone

You can provide power to your phone in one of these ways:
• Use the power adapter that comes with your phone.
• Desk phones: If your network supports Power over Ethernet (PoE), you can plug your phone into the
• Conference phones (for Webex Calling (formerly Spark Call)): If your network supports Power over
If you are not sure whether your network supports PoE, check with your administrator.
Your Desk Phone Button Layout on Webex Calling (formerly
Spark Call)
If you want to reorder the buttons on your desk phone, ask your administrator to do that for you.
Traditional Phone Button Layout
Here's the default layout of your phone buttons, which stays in place until your administrator customizes it
for you:
1. Button 1 is always the line button for your primary line.
2. Your secondary lines, if any. These lines appear in numerical order.
3. HLog to log in to and out of any hunt groups.
This button appears only if you belong to a hunt group.
4. Call park buttons, one for each call park group you are in.
These buttons appear only if you are in a call park group.
Cisco IP Phone 7800 and 8800 Series, Cisco IP Conference Phone 7832, and Cisco ATA 190-SC User Guide for Webex Calling (formerly Spark
Call)
196
network. Plug an Ethernet cable into the Ethernet phone port
Ethernet (PoE), you can plug your conference phone into the network.
Additional Information
and into the network.