Step 1C - Attach Ram Plate To Vehicle And Attach Ram Ball - Honeywell Thor VM2 Reference Manual

Step 1c – Attach RAM Plate to Vehicle and Attach RAM Ball
Note: If you are using the RAM ball mount, please go to
1b.
1. Determine the position for mounting the RAM ball plate. Be sure to position the RAM plate to allow access to the
switches and ports on the bottom of the Thor VM2.
2. Attach the RAM ball plate to the vehicle mounting surface using four 1/4 bolts (or equivalent) fasteners.
3. If not already attached, attach the RAM ball to the RAM ball plate using three M6 nuts and washers.
Note: 1/4 bolts not included.
IMPORTANT: Mount to the most rigid surface available.
2-8
Step 1a. If you are using the RAM clamp mount, please go to Step