Torque Measurement; Mounting Positions - Honeywell Thor VM2 Reference Manual

Torque Measurement

You will need a torquing tool capable of torquing to 35-50 inch pounds (1.10 N/m). Torque all screws and bolts according to the
following table:
For these bolts...
1/4-20x5/8 Bolts
M5x16mm Bolts
1/4 Bolts (user supplied)

Mounting Positions

The adapter bracket can be mounted in a high or low position, depending on viewing position, as shown below.
Additionally, the slotted U bracket allows the Thor VM2 to be mounted vertically or tilted forward or backward for best viewing
angle.
Torque to
50 in/lb (5.6 N/m)
35 in/lb (4.0 N/m)
50.0±5 in/lb (5.64±.56 N/m)
3-3