Auto-On Control - Honeywell Thor VM2 Reference Manual
Vehicle-mount computer
Hide thumbs
Also See for Thor VM2:
- User manual (398 pages) ,
- Reference manual (196 pages) ,
- Quick start manual (12 pages)
Table of Contents
Advertisement
Auto-On Control
Auto-On power mode must be enabled. The vehicle supply connections should be made to vehicle switched power to allow the
terminal to automatically power-up when vehicle power is switched on or when the power switch on the back of the Dock is
placed in the On position. The Ignition wire is not used and should be left disconnected.
Note:
If the vehicle chassis is not a suitable ground, connect the Green wire to the negative terminal (-Vo) of the power
source.
4-5
Advertisement
Table of Contents
