Gps Remote Mount Antenna - Honeywell Thor VM2 Reference Manual

GPS Remote Mount Antenna

The external GPS antenna is an adhesive mount antenna.
The Remote Antenna Installation Kit consists of the antenna and an integrated cable. The remote antenna is mounted on the
top of a forklift, truck or other vehicle and cabled to the Thor VM2 inside the vehicle.
1. Locate a mounting position on highest point on the vehicle, following these precautions:
The antenna must be mounted so the antenna is not damaged while the vehicle or any of its parts are
l
moving.
2. Clean the area where the antenna is to be mounted.
3. Remove the protective backing paper from the adhesive on the antenna and position the antenna on the vehicle.
4. Attach the connector on the coaxial cable to the antenna connector on the vehicle mounted Thor VM2.
5. Use cable ties to secure the coaxial cable to the vehicle as necessary. Make sure the cable is routed so it is not
damaged by any moving parts of the vehicle.
4-22