4.5. ADJUSTMENT
4.5.1. TORSION SPRING 28
4.5.2. SAW BLADE (90° ANGLE ADJUSTMENT)
1R208
4.5.3. SAW BLADE (45° ANGLE ADJUSTMENT)
1R207
(151)
Figure 79
(138)
(173)
Figure 80
(138)
(173)
Figure 81
Adjust the strength of Torsion spring 28 (118) with M6x10
H.S. set screw (151) so that Blade case section can be
returned to the highest raised position smoothly from
every position.
Adjust the angle of saw blade at 90° against Turn base
complete (173) using 1R208 and M6x16 Hex socket head
bolt (138).
Adjust the angle of saw blade at 45° against Turn base
complete (173) using 1R207 and M6x16 Hex socket head
bolt (138).
October 2015
41 / 47