4.4. DISASSEMBLY/ASSEMBLY
4.4.1. WARNING
Remove Battery and Blade from the machine.
4.4.2. BLADE CASE COMPLETE
4.4.2.1. DISASSEMBLING
(145)
(30), (31), (32)
(145)
Figure 10
(33)
Figure 11
(46)
(151)
(150)
Figure 12
1. Remove Safety cover section and Dust nozzle (41).
2. For setting the machine at the highest raised position,
push Stopper pin (154) into Front arm complete (145).
(154)
3. Remove M6x20 Hex socket head bolt (30), Flat washer 6
(31) and Ring 6 (32), then remove Link plate complete
(33) from Front arm complete (145).
4. Loosen M6x10 H.S. set screw (150), (151).
Note: It is not necessary to remove the screws from Blade
case complete (46).
October 2015
15 / 47