(3)
Motor housing section
4.4.2.2. ASSEMBLING
Assemble by reversing the disassembly procedure.
Be careful to check the points mentioned in
(117 or 119)
(46)
Handle section
Figure 21
Figure
22,
(118)
(117 or 119)
Figure 22
(118)
Figure 23
13. Remove six M5x45 Pan head screws (3), then remove
Handle section and Motor housing section.
Figure
23,
Figure
24,
Figure
1. Insert two Sleeves 17 (117 or 119) into Torsion spring 28
(118).
2. Hook Torsion spring 28 (118) with Blade case
complete (46) as drawn in the figure on the left.
October 2015
25.
18 / 47