Makita DLS714 Technical Information page 28

Figure 51
1R291
Figure 52
(48)
Bearing box section
1R036
Figure 53
Figure 54
4. Set Ring 12 (52) and Helical gear 53 (51).
5. Put 1R030 onto Helical gear 53 (51) and press 1R030 to
press-fit Helical gear 53 (51).
1R030
(51)
(52)
1R036
6. Set Retaining ring S-12 (49) with 1R291.
(49)
7. Put Bearing box section onto 1R036.
8. Press-fit a new Ball bearing 607DDW (48).
Note: Be sure to replace the removed Ball bearing with a
new one, because the removed one is damaged.
9. Be sure to assemble O ring 46 (53).
(53)
October 2015
28 / 47