4.4.5.2. ASSEMBLING
Assemble by reversing the disassembly procedure.
Be careful to check the points mentioned in
(9)
Concave portion
4.4.6. BEARING BOX, HELICAL GEAR 53
4.4.6.1. DISASSEMBLING
(59)
Figure
38.
(6)
Projection
Figure 38
(145)
(154)
Figure 39
(57)
Figure 40
Fit the concave portion of Switch (9) to the projection of
Lock off button (6).
1. For setting the machine at the raised position,
push Stopper pin (154) into Front arm complete (145).
2. Remove two M5x16 Pan head screws (59), then remove
Bearing retainer 58 (57).
October 2015
24 / 47