4.4.4. STATOR
4.4.4.1. DISASSEMBLING
1. Remove Rotor ass'y (25). (See
(11)
Terminal B
(4)
(19)
4.4.4.2.
ASSEMBLING
Assemble by reversing the disassembly procedure.
Figure 26
Figure
to
Figure 32
Battery fuel gauge section
(1)
Figure 33
(23)
Figure 34
29.)
2. Remove three 4x18 Tapping screws (11), then remove
(12)
Handle cover complete (12).
3. Remove Battery fuel gauge section and Terminal B from
Handle set (1).
4. Remove six 4x18 Tapping screws (4), then remove
Handle set (1).
6. Remove two 4x18 Tapping screws (19), then remove
Baffle plate (24).
7. Remove Stator (23).
October 2015
22 / 47