Makita DLS714 Technical Information page 32

(66)
Four bosses
Figure 62
(70)
Figure 63
(65)
9. Move Center cover (63) until its projection touches the flange of M6x16 Hex socket head bolt (65).
10. Fix Center cover (63) to Blade case complete (46) with M6x16 Hex socket head bolt (65).
11. While strongly pushing Safety cover (68) in the direction indicated by the arrow, tighten M5x16 H.S. button head
bolt (70).
5. Apply Makita grease FA No.2 a little on Center plate (62)
(62)
6. Apply Makita grease FA No.2 a little on the sliding
(63)
7. Mount Center plate (62) to the four bosses on Safety
(68)
8. Temporarily tighten M5x16 H. S. button head bolt (70).
(69)
Projection on Center cover (63)
Flange of
M6x16 Hex socket head bolt (65)
(70)
Figure 64
against Center cover (63).
surface between Center cover (63) and Center washer
(66).
cover (68).
(46)
(68)
October 2015
32 / 47