4.4.11. POSITIVE LOCK MECHANISM OF TURN BASE COMPLETE
4.4.11.1. DISASSEMBLING
(180)
1. Remove Grip 32 (190).
2. Remove two CT 4x16 Tapping screws (186) to separate Lock lever plate (185) and Lock lever (184) from Turn base
complete (173).
3. Remove Pin 3 (180) while pressing Compression spring 6 (182) toward Grip 32 (190) assembling side.
4. Pull off Lock pin (181) from Turn base complete (173).
Compression spring 6 (182) can be removed from Lock pin (181).
(190)
(182)
(181)
Figure 70
(186)
(186)
(185)
(184)
(173)
October 2015
35 / 47