Makita DLS714 Technical Information page 16

Figure 13
Figure 14
1R003
Figure 15
(145)
Figure 16
5. Holding the machine at Blade case section, release
Stopper pin (154).
(154)
6. Slowly raise Machine until it stands vertically to Base.
7. Insert 1R003 into the hole of Pin 16-90 (155). Spread its
tips to hold the pipe. Then, while twisting 1R003, pull off
Pin 16-90 (155) from the machine.
(155)
8. Remove Blade case complete (46) from Front arm
complete (145).
(46)
October 2015
16 / 47