Yamaha CL3 Service Manual page 64

Digital mixing console
Hide thumbs Also See for CL3:
Table of Contents

Advertisement

CL3/CL1
B-4. PNENL Added Button
(Time required: About 13 minutes)
B-4-1. Remove the control panel U5 assembly.
(See procedure 1)
B-4-2. Remove the two (2) encorder knobs marked [560A],
the twelve (12) encorder knobs marked [570], the
encorder knob marked [580], the encorder knob
marked [590], the encorder knob marked [600], the
four (4) encorder knobs marked [610], the four (4)
encorder knobs marked [620], the four (4) encorder
knobs marked [630] and the four (4) encorder knobs
marked [640]. (Fig. 7)
B-4-3. Remove the eleven (11) screws marked [290]. The
PNENL added button can then be removed. (Fig. 8)
*
When installing the PNENL added button, tighten the
screws z and x shown in fi g. 8 in numerical order
and then tighten the other screws.
B-5. USB Circuit Board
(Time required: About 7 minutes)
B-5-1. Remove the control panel U7 assembly.
(See procedure 1)
B-5-2. Remove the two (2) screws marked [380A]. The USB
circuit board can then be removed. (Fig. 8)
*
When installing the USB circuit board, tighten the
screws z and x shown in fi g. 8 in numerical order.
B-5-3. Remove the two (2) screws marked [380B]. The
USB circuit board and USB fi xed angle can then be
separated. (Fig. 8)
*
When installing the USB fixed angle, tighten the
screws z and x shown in fi g. 8 in numerical order.
USB FIXED ANGLE
(USB 固定金具)
USB
x
z
[380B]
x
z
[380A]
64
[310]
z
PNENR
x
[310]
B-4.  PNENL ボタン付
(所要時間:約 13 分)
B-4-1.  コンパネ U7 Ass y を外します。 (1 項参照)
B-4-2.  [560A] のエンコーダーノブ 2 個、[570] のエンコー
ダーノブ 12 個、 [580] のエンコーダーノブ 1 個、 [590]
のエンコーダーノブ 1 個、[600] のエンコーダーノ
ブ 1 個、[610] のエンコーダーノブ 4 個、[620] のエ
ンコーダーノブ 4 個、 [630] のエンコーダーノブ 4 個、
[640] のエンコーダーノブ 4 個を外します。 (図 7)
B-4-3.  [290] のネジ 11 本を外して、PNENL ボタン付を外
します。 (図 8)
PNENL ボタン付を取り付ける際は、図 8 に示す z、x
※ 
の順にネジを締めてから他のネジを締めてください。
B-5.  USB シート
(所要時間:約 7 分)
B-5-1.  コンパネ U7 Ass y を外します。 (1 項参照)
B-5-2.  [380A] のネジ 2 本を外して、 USB シートを外します。
(図 8)
USB シートを取り付ける際は、図 8 に示す z、x の順
※ 
にネジを締めてください。
B-5-3.  [380B] のネジ 2 本を外して、USB シートから USB
固定金具を外します。 (図 8)
USB 固定金具を取り付ける際は、図 8 に示す z、x の
※ 
順にネジを締めてください。
Fig. 8  ( 図 8)
[290] x11
z
PNENL
x

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cl1

Table of Contents