Yamaha CL3 Service Manual page 176

CL3/CL1
6) Completion of updating
When updating is over, a popup confi rming it will appear.
Press the [OK] button, and the screen display will be as
shown below.
("Update Done" is indicated in the Status column)
7) End of application
Press the X mark to end the application
● Confi rmation of model name
Check to make sure that the model name is correct by referring
to Device Status of DANTE CONTROLLER.
● Updating Procedure
If an error message is indicated in the status column, do not
turn off the power switch of CL but execute the updating
procedure again.
176