Yamaha CL3 Service Manual page 135

● List of check items
Item Check name
1-0 INFORMATION
1-1 CPU MRAM
1-2 CPU SDRAM
1-3 BATT
1-4 RTC
1-5 PLLPU
1-6 DSP6
1-7 DSP7
1-8 SHARC
1-9 SLOT
1-10 AIN/AOUT
1-11 WORD CLOCK
1-12 AES/EBU OUT
1-13 MIDI
1-14 GPI
1-15 NETWORK
1-16 USB STORAGE
1-17 LAMP
1-18 LCD
1-19 TOUCH PANEL
1-20 HAAD
1-21 RECORDER
1-22 DNTU SDRAM
1-23 DNTU PLLPU
1-24 DNTU SIO
1-25 DNTU Brooklyn2
2-1 Ch Name LCD indication
2-2 LED all lighting
2-3 LED lighting by colors
2-4 Switch input
2-5 Encoder input
2-6 Fader movement time measurement Check movement of motor fader (Calibration in advance required)
*1 Judgment is OK if communication with the test program is possible.
*2 Check each panel visually if necessary as checking runs automatically.
Outline of check item
Check the version and other items of the fi rmware.
heck the data bus and address bus of CPU MRAM.
Check the data bus and address bus of CPU SDRAM.
Check the voltage of the backup battery.
Obtain and set Real Time Clock.
Check PLLPU register by reading/writing it.
Check each DSP6 register by reading/writing it. Check SIO for connection.
Check each DSP7 register by reading/writing it. Check SIO for connection.
Check communication/FLAG line between CPU and SHARC.
Check SHARC SDRAM
Check each signal of SLOT and power voltage.
Unused
Check PLL LOCK by counting Fs of WCLK OUT at WCLK IN.
Check through sound by connecting with SYSTEM2/speaker.
Check transmission/reception by loopbacking MIDI IN/OUT.
Connect IN/OUT with jig.
Check by communicating with PC.
Check control line by reading/writing USB MEMORY.
Check by actually turning the lamp on and off.
Check LCD indication.
Check touch point scale/luminance by touching LCD.
Unused
Check RECORDER IC register by reading/writing it.
Check SIO connection.
Check Data Bus and Address Bus of CPU SDRAM on DNTU.
Check PLLPU register on DNTU by reading/writing it.
Check UART and SPI with Brooklyn2.
Check Brooklyn2 and Primary/Secondary ports.
Check Ch Name LCD and each Ch name indication.
Check that all LEDs for lighting altogether and one by one.
Check lighting of red, orange, yellow and green LEDs color by color.
Check input from switches.
Check input from encoder.
CL3/CL1
Judgment
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
—
Semi-auto
Visual check
Auto
Auto
Auto *1
Auto
Visual check
Semi-auto
Semi-auto
—
Auto
Auto
Auto
Auto
Auto
Visual check *2
Visual check *2
Visual check *2
Visual check *2
Visual check *2
Auto
135