Configuring For Abnormalities - Honeywell Performance HDZP252DI User Manual

Parameter
Enable Face
Enhancement
Record
Record Delay
Send Email
PTZ
Snapshot

Configuring for Abnormalities

Abnormalities include No SD Card, Capacity Warning, SD Card Error, Network
Disconnection, IP Conflict, and Unauthorized Access.
Configuring for Micro SD Card Abnormalities
Micro SD card Abnormalities include No SD Card, SD Card Error, and Capacity Warning.
Table 7-5 Face Detection Configurations (cont'd)
Function
Check Enable Face Enhancement to ensure the face is clearly
displayed by priority, even when the stream resolution is low.
When Record is enabled, face detection will trigger a recording.
The system will wait for the specified time before it ends recording.
Select from 10 to 300 seconds.
When this function is enabled, the system sends an email alert to you
when an alarm occurs. The email settings must be configured for this
feature to be used (see
Select the PTZ check box to program the camera to perform a PTZ
action, from Preset, Tour, or Pattern when the event is active. Select the
action from the drop-down list and then the number of the Preset, Tour,
or Pattern to perform from the second drop-down list.
Check to enable the system to save snapshot files (still images) while
the face detection event is activated. See
information about configuring where snapshots are saved.
Note Smart Plan must be enabled if you want to use the Face Detection function.
Configure the face detection settings and then enable Smart Plan to complete
face detection setup (see
Note Only cameras with Micro SD cards can detect the following abnormalities: No SD
Card, Capacity Warning, and SD Card Error.
Configuring Events and Alarms | 99
SMTP (Email) on page
Path on page 62
Configuring a Smart Plan on page
54).
for
97).
800-22757 - A - 02/2017