Honeywell Performance HDZP252DI User Manual page 37

Table 5-1 Camera Picture Configurations (cont'd)
Parameter Function
Adjusts video sharpness. Choosing a higher value increases the sharpness of
the video. Select from 0 to 100. The recommended range is between 40 and
Sharpness
60. The default value is 50.
Note Choosing a higher value can introduce video noise to the image.
Adjusts video sharpness. Choosing a higher value increases the sharpness of
Sharpness
the video. Select from 0 to 100. The recommended range is between 40 and
CNT
60. The default value is 50.
Adjusts dynamic range. Choosing a higher value increases the brightness of
Gamma the image non-linearly. Select from 0 to 100. The recommended range is
between 40 and 60. The default value is 50.
0°: Video is not flipped. This is the default setting.
Flip
180°: Flips the video 180°.
Full-screen Click the
Test full-screen test. Double-click to return to the normal screen.
Default Click to return the camera to the default setup.
Click to cancel the current operation and restore the previously saved
Refresh
operation.
Save Click to save the currently configured customized settings.
Exposure Settings
Figure 5-2 Camera Setup - Exposure Window
button on the bottom left of the video window to begin a
Configuring Camera Settings | 37
800-22757 - A - 02/2017