Honeywell Performance HDZP252DI User Manual page 66

66 | Performance Series IR 1080p IP PTZ Camera User Guide
Local
On the Local tab, you can view local Micro SD card disk information (such as capacity). You can
also access the Read Only, Read & Write, Hot Swap, and Format functions.
FTP
On the FTP tab, you can enable the FTP storage function. When enabled, event-triggered video
and snapshots (either scheduled or motion detection, depending on what you chose in
page
Parameter
Enable
Server Address
Port
User Name
Password
www.honeywell.com/security
Figure 5-31 Local Storage Configuration Interface
65) will be saved to the specified FTP server.
Figure 5-32 FTP Configuration Interface
Table 5-22 FTP Configurations
Function
Check this box to enable the FTP option.
Set the IP address of the FTP server.
The default setting is 21. You can modify this setting as necessary.
Enter the server user name.
Enter the server password.
Path on