Honeywell Performance HDZP252DI User Manual page 44

44 | Performance Series IR 1080p IP PTZ Camera User Guide
Parameter
Digital Zoom
Zoom Speed
Mode
Focus Limit
Sensitivity
Full-screen Test
Default
Refresh
Save
www.honeywell.com/security
Table 5-6 Zoom and Focus
Function
Enable or disable the digital zoom function by selecting ON or OFF.
Digital zoom is off by default. The digital zoom setting will not affect
optical zoom functions.
Set the speed of zoom actions with this setting. The speed ranges from
0 to 100. The default setting is 100.
Select the focus mode from the Mode drop-down list from Semi Auto,
Auto and Manual. When Auto is selected, the camera will continuously
automatically focus the image. When Semi Auto is selected, the
camera will automatically focus the image when a pan, tilt or zoom
function occurs. When Manual is selected, users must manually focus
the camera as it is needed.
Select the limit that focus will go to from the Focus Limit drop-down list.
Select from Auto, 10cm, 1m, 2m, 3m, and 5m. Auto is the default
setting. When Auto is selected, the camera will focus to any range,
without limit. When 10cm is selected, the camera will only focus on
objects that are further than 10cm away from the camera.
Selecting any of the focus limit distances, such as 1 meter, is meant to
prevent the camera from automatically focusing on a nearby objects
and resulting in an out-of-focus background where an incident could be
missed. Choose a focus limit that suits your PTZ environment. For
example, if there are tree branches near to the PTZ camera, choose a
focus limit that will prevent the camera from focusing on the branches.
Select the auto focus Sensitivity setting from the drop-down list. Select
from High, Low, or Default (middle). Selecting High sensitivity will
have the camera automatically focus with any slight change in the
scene. Selecting Low sensitivity will have the camera automatically
focus only when there is a significant change in the scene. Default is a
mid-range setting in between Low and High.
Click the
full-screen test. Double-click to return to the normal screen.
Click to return the camera to the default setup.
Click to cancel the current operation and restore the previously saved
operation.
Click to save the currently configured customized settings.
button on the bottom left of the video window to begin a