Configuring Camera Settings; Configuring Camera Properties; General Settings - Honeywell 30 Series Configuration Manual

Performance Series IP Camera Software Configuration Guide

4 Configuring Camera Settings

This chapter contains the following sections:
• Configuring Camera Properties, page 20
• Configuring Video Settings, page 30
• Configuring Digital PTZ Settings, page 36

Configuring Camera Properties

Go to Setup Camera Setup  Properties.
This section describes how to configure the image settings of camera (picture, exposure,
lighting compensation, white balance, day and night, IR light, etc.).
Click Save to enable the settings after you completed the settings
Note
on each page.

General Settings

Go to Setup Camera Setup  PropertiesGeneral Settings.
On this page, you can configure the general video settings and day/night settings.
20