Honeywell Performance HDZP252DI User Manual page 100

100 | Performance Series IR 1080p IP PTZ Camera User Guide
1.
2.
3.
4.
Configuring for Network Abnormalities
Use these options to configure for Network Abnormalities such as network Disconnection and
IP Conflict.
1.
2.
3.
Configuring for Illegal Access
If someone attempts multiple times to login using an incorrect password, and Illegal Access is
enabled, an alarm will occur. You can specify how many attempts can be made before the Illegal
Access alarm occurs.
www.honeywell.com/security
Figure 7-8 No SD Card Warning Configuration Interface
Select the SD card Event Type from the drop-down list.
Click Enable so that an alarm is triggered when the selected Micro SD card error occurs.
Enter a Capacity Limit for the Capacity Warning Micro SD card error as the threshold for
how full the SD card will get before the Capacity Warning is sent.
Click Save to save your settings.
Figure 7-9 Network Disconnection Configuration Interface
Select the Network Event Type from the drop-down list.
Click Enable so that an alarm is triggered when a network disconnection or an IP conflict
occurs.
Click Save to save your settings.