Honeywell Performance HDZP252DI User Manual page 58

58 | Performance Series IR 1080p IP PTZ Camera User Guide
Before you can restrict access to the cameras through the IP filter, you must first configure the
Trusted Sites here (see
MAC addresses of the sites that will be trusted to access the camera.
CAUTION
the IP/MAC address that is allowed to access the camera, you will have to
return the camera to the factory to repair the problem.
www.honeywell.com/security
Figure 5-21 IP Filter Configuration Interface
Figure
Note Add the addresses that will be allowed to access the camera before enabling
Trusted Sites.
Note If you specify a MAC address limitation here, the computer with the specified
MAC address must be in the same network subnet as the IP camera.
If you setup the IP Filter/Trusted sites options and forget
5-21). Under Trusted Sites, click Add IP/MAC to add the IP or