Honeywell Performance HDZP252DI User Manual page 80

80 | Performance Series IR 1080p IP PTZ Camera User Guide
3.
4.
5.
6.
7.
Deleting a Preset Point
1.
2.
Go to a Preset Point
1.
2.
www.honeywell.com/security
Figure 6-1 Preset Position Configuration Interface
Under the video screen, use the PTZ controls to move the image to the desired preset
position.
Adjust the Zoom, Focus and Iris settings using the + and – buttons for each setting, as
required.
If required, double-click the Preset Title to enter a specific preset title.
If required, double-click the Preset No. to enter a different preset number for the current
preset.
Click the Save icon ( ) for the preset to save it.

Navigate to Setup PTZ
Click the Delete icon (
Note Alternatively, you can click Clear to delete all of the presets in the list.

Navigate to Setup PTZ
Select the preset that you want the camera to move to from the Preset list. The camera will
move to point at that preset position.
 
Function Preset (see
) for the preset you want to delete.
 
Function Preset (see
Figure 6-1).
Figure 6-1).