Interface; Bke - Interface Pcb; Usb Interface - GE eBike II Series Service Manual

I
nterfaCe
Bke - I pCB
nterfaCe
The BKE board carries the external PC interfaces (RS-232
and USB).
Both interfaces are electrically isolated (optocouplers).
The BKE is the only board without a microprocessor.
Therefore this board is always connected directly to the
LRE board - the jack on LRE is labeled with „RS-232".
usB I
nterfaCe
d (
rIver InstallatIon vIrtual
Administrator rights are required to install the driver.
• Start PC and Monitor.
• Finish all running programs (- in background running
programs as well).
• Insert the USB driver CD (PN 2017911-130) into the
CD-ROM drive.
• Depending on the Windows
start the appropriate driver from the CD:
Windows 2000 :
®
CP210x_VCP_Win2K_XP_S2K3.exe
Windows XP , Windows Vista
®
CP210x_VCP_XP_S2K3_Vista_7.exe
2018112-069 Rev. F
CoM )
x
operating system used,
®
, Windows 7, Windows 8 :
® ®
eBike II, eBike II L, eBike II EL
bKe i
nterface board
rJ-45 lre
connector on thge
bKe
interface board
board to connect with the
- 31 -