Advertisement
Chapter 6 SyCon Setting
General
DP Support
FMS Support
5) DP Master settings
a) Set the "Controlled release of the communication by the application program" in "Parameter to user
interface"
b) Set "1000ms" in "User program monitoring"
c) "Parameter to process data interface"
(a) Set "Byte addresses" in "Addressing mode"
(b) Set "Little Endian" in "Storage format(word module)"
d) Set "Buffered, host controlled" in "Handshake of the process data"
14
Pnet I/F Module 2MLL-PSRA, 2MLL-PMEA, 2MLL-PMEB User's Guide
Item
Description
Station address
Device
DP Master Settings
Honeywell
Description
Explain of Master
Setting of Master station number
Display of Master board
Setting of DP Master
It is set when the device supports the FMS
R240
January 2019
Advertisement
