Advertisement
Chapter 9 P2P
Diagnosis
Communication
module information
Status by service
Auto-scan
(b) Right clink on the Pnet I/F module and select [Status by service], then P2P service
information will be open as [Figure 9.5.3]
10
Pnet I/F Module 2MLL-PSRA, 2MLL-PMEA, 2MLL-PMEB User's Guide
[Figure 9.5.2] System diagnosis
Shows standard information of communication module
Shows P2P and High-speed link flag information
Shows the master and slaves that connected with Pnet network
[Table 9.5.2] System diagnosis list
[Figure 9.5.3] P2P service monitor
Honeywell
Description
R220
January 2019
Advertisement
