4) Slave Configuration
- It can be display of configuration of slave and editing address.
General
Assigned master
Actual slave
6.3.6 Bus parameter
"Settings" "Bus Parameter", it can be set the communication speed.
Baud rate is selected correspond to system operation.
17
Pnet I/F Module 2MLL-PSRA, 2MLL-PMEA, 2MLL-PMEB User's Guide
Item
Device
Station address
Description
Activate device in actual
configuration
Enable watchdog control
Master1
Slave2
Honeywell
Chapter 6 SyCon Setting
Description
Slave module name
Slave station number
Slave description
Activate device in actual configuration
Enable watchdog control
(Default : 200ms)
Display master assigned
Slave operation display
R240
January 2019