Honeywell 2MLL-PMEC User Manual page 81

Chapter 7 N Configurator Setting
[Figure 7.4.7] Slave parameter settings window
Slave module settings window is as shown below. If a slave module is an expansion adapter
such as MPL-BSSA, you can add the module to the expansion adapter by double clicking the
module at the above module list. If you add wrong one, double click the item to delete it.
[Figure 7.4.8] Slave module settings window
15 Pnet I/F Module 2MLL-PSRA, 2MLL-PMEA, 2MLL-PMEB User's Guide R240
Honeywell January 2019