Advertisement
8.3 Operation Sequence of High-speed Link
Operation sequence of High-speed link
No. S/W applied
1
2
SyCon or
N Configurator
3
4
5
6
7
8
9
10
11
SoftMaster
12
13
14
15
3
Pnet I/F Module 2MLL-PSRA, 2MLL-PMEA, 2MLL-PMEB User's Guide
Operation
Execute Configuration tool
Set Network Configuration
Connect to
communication port
Download Network
Configuration
SoftMaster execution
Make new file
Set SoftMaster connection
Connect to SoftMaster
IO Information Read
Define
High-speed
link
project
Set communication module
and communication period
Upload SyCon
High-speed
Link
Block
Setting
High-speed Link
Parameters Write
High-speed Link Enable
[Table 8.3.1] Operation sequence of High-speed link
Honeywell
Chapter 8 High-speed Link
Execute SyCon for 2MLL-PMEA, N Configurator for
2MLL-PMEB/C
Refer to Chapter 6 SyCon Setting (2MLL-PMEA) or
Chapter 7 N Configurator Setting (2MLL-PMEB/C)
Refer to Chapter 6 SyCon Setting (2MLL-PMEA) or
Chapter 7 N Configurator Setting (2MLL-PMEB/C)
Refer to Chapter 6 SyCon Setting (2MLL-PMEA) or
Chapter 7 N Configurator Setting (2MLL-PMEB/C)
Execute installed SoftMaster
Project New project
Setting project name and type
Select applicable connection driver through SoftMaster
Online Connection settings
SoftMaster Online Connect
SoftMaster Online Diagnosis I/O Information
Click "I/O Sync"
Specify "High-speed Link" on the SoftMaster screen
Select one among "High-speed link 1" ~ "High-speed
link 12" and double-click it to specify module type, base
No., slot No. and period type
Double-click the created "Block" and click
Online Communication module setting Config.
Upload while cursor is on the "High speed link" window
Double-click the cell on the "High-speed Link" screen
1) For Send : specify Read area (CPU area)
2) For Receive : specify Save area (CPU area)
Online Write: check applicable High-speed link and
write
Online Communication module setting Enable
Link: enable applicable High-speed link
Details
January 2019
R220
Advertisement
