Advertisement
Chapter 7 N Configurator Setting
(6) Diagnostics menu
This is PROFIBUS DP application menu to provide diagnosis and monitoring functions.
Sub-menu
Start Communication
Stop Communication
Start Debug Mode
Device Diagnostics...
Stop Debug Mode
Live List...
Auto. Network Scan...
I/O Monitor...
Disconnection Report...
Device Information...
Firmware Reset
8
Pnet I/F Module 2MLL-PSRA, 2MLL-PMEA, 2MLL-PMEB User's Guide
[Figure 7.3.7] Diagnostics menu composition
Start communication by setting up master as OPERATE mode
Stop communication by setting up master as STOP mode
Convert to debug mode and monitor slave
Diagnostic information of the selected slave
Terminate the debug mode
Display slaves under communication among the slaves set up at
master
Scan all slaves connected to master through network cable
Monitor I/O of slave
Display the number of disconnection among slaves set up at master
Hardware and software information of master
Reboot the master
Honeywell
Description
R240
January 2019
Advertisement
