Advertisement
(3) Screen after "SyCon Upload"
(4) High-speed link parameter settings
Classification
Master
Display the Master station no.
Station No.
Setting range for the slave : 0 ~ 126
Station No. *1
If identical station No. is set, communication will not be normal.
Sending: Transmission the data from master module to slave module.
Mode *1
Receiving: Transmission the data from slave module to master module.
Read area
(Master module
→
Slave module)
Save area
(Slave module
→
Master module)
Send data
Display input/output points of slave module by the bytes.
Receive data
- In case of I/O module of 8 bits or less, please set 1 byte.
(Byte)
*1 : Area is not able to set
9
Pnet I/F Module 2MLL-PSRA, 2MLL-PMEA, 2MLL-PMEB User's Guide
[Figures 5.2.11] Screen after SyCon uploaded
Area to set the start address of device used for Sending.
2MLK
Setting device : P, M, K, F, T, C, U, Z, L, N, D, R, ZR
Area to set the start address of device used for Sending.
2MLI
Setting device : A, M, I, Q, R, W, F, K, L, N, U
Area to set the start address of device used for Receiving.
2MLK
Setting device : P, M, K, F, T, C, U, Z, L, N, D, R, ZR
Area to set the start address of device used for Receiving.
2MLI
Setting device : A, M, I, Q, R, W, F, K, L, N, U
[Table 5.2.2] High-speed link Block Settings
Honeywell
Chapter 5 Communication Program
Details
R240
January 2019
Advertisement
