Advertisement
Items
Communication
module settings
Communication
period settings
CPU
Output data
error
setup in
case of
CPU
emergency
stop
settings
7) Config. Upload
After "Setting of communication module and communication period" is complete, while putting the
mouse cursor on High-speed link window (right screen of SoftMaster), and select "Online"
"Communication module setting" "Config. Upload (Dnet, Pnet)" to upload a configuration file.
7
Pnet I/F Module 2MLL-PSRA, 2MLL-PMEA, 2MLL-PMEB User's Guide
Module
Select Pnet I/f module
type
Setting of base position installed
Base No.
Range of Setting: 0 ~ 7 (varying depending on the CPU module)
Setting of slot position installed
Slot No.
Range of Setting: 0 ~ 11
High-
Setting of High-speed link index number
speed link
Range of Setting: 1~12
index
- Range of setting: 20ms, 50ms, 100ms, 200ms, 500ms, 1s, 5s, 10s
( default is 20ms )
Period
- This applied to Send data
type
- But Receive data will be processed in every scan end regardless of
communication period.
Keeps its output status
Latch
(But, P device data is cleared)
Clears all outputs
Clear
Keeps its output status
Latch
(But, P device data is cleared)
Clears all outputs
Clear
[Table 8.4.2] Setting of communication module
Honeywell
Chapter 8 High-speed Link
Description
R220
January 2019
Advertisement
