Figure 6-17 Media Type - Video Clip - Honeywell 30 Series Configuration Manual

Select to send snapshots when a trigger is activated.
•
Media name: Enter a name for the media setting.
•
Source: Select to take snapshots from any of the video streams.
•
Send x pre-event images:
The camera has a buffer to temporarily hold data up to a certain limit. Enter a number to
decide how many images to capture before a trigger is activated. Up to 7 images can be
generated.
•
Send x post-event images:
Enter a number to decide how many images to capture after a trigger is activated. Up to 7
images can be generated.
For example, if both the Send pre-event images and Send post-event images are set to 7,
a total of 15 images can be generated after a trigger is activated.
•
File name prefix
Enter the text that will be appended to the front of the file name.
•
Add date and time suffix to the file name
Select this option to add a date/time suffix to the file name.
Click Save media to enable the settings. The new media server will be automatically displayed
in the Media list. If you wish to add more media options, click Add media.
Media type - Video clip
Select to send video clips when a trigger is activated.

Figure 6-17 Media type - Video clip

•
Media name: Enter a name for the media setting.
•
Source: Select a video stream as the source of video clip.
•
Pre-event recording
Configuring Video Analytics
69