Configuring Https Settings; Figure 5-13 Http; Figure 5-14 Certificate Request - Honeywell 30 Series Configuration Manual

Performance Series IP Camera Software Configuration Guide
•
Security name: Choose Read/Write or Read Only and enter the community name
according to your NMS settings.
•
Authentication type: Select MD5 or SHA as the authentication method.
•
Authentication password: Enter the password for authentication (at least 8 characters).
•
Encryption password: Enter a password for encryption (at least 8 characters).

Configuring HTTPS Settings

Go to Setup Network Setup  HTTPS.
HTTPS
Go to Setup Network Setup  HTTPS HTTPS.
This section explains how to enable authentication and encrypted communication. It helps
protect streaming data transmission over the Internet on higher security level.

Figure 5-13 HTTP

HTTP & HTTPS: Select it and the web browser can be accessed via HTTP or HTTPS.
HTTPS only: Select it and the web browser can only be accessed via HTTPS with higher
security level. This option is selected by default.
Certificate Request
Go to Setup Network Setup  HTTPS Certificate Request.
You can fill in certificate information and the certificate request file can be exported to the
certificate issuing authority for signing and then being imported to camera.

Figure 5-14 Certificate Request

52