Motion Detection; Figure 6-2 Configuring Motion Detection Settings - Honeywell 30 Series Configuration Manual

Performance Series IP Camera Software Configuration Guide

Motion Detection

The Motion Detection detects motions in customized windows. If a motion is detected, the
frame of the customized window will become flashing red.
To enable motion detection:
1. Click New to add a new motion detection window.
2. In the Window Name text box, enter a name for the motion detection window.
a. Draw a detection area by clicking four corner points on the target area. You can
change the shape of the detection area by dragging the corner points.
b. Drag the item size slider to change the minimum size of item to trigger an alarm. An
item size box will appear in the center of screen for your reference (in semi-
transparent red). An intruding object must be larger than the Item size to trigger an
alarm. Change the item size according to the live view.
c. To delete a window, click
3. Define the sensitivity to moving objects by moving the Sensitivity slider. A high sensitivity
is prone to produce false alarms such as the fast changes of light (such as day/night
mode switch, turning lights on/off). A movement must persist longer than 0.3 second for
the motion to be detected.
4. Click Save to enable the settings.
5. Select Enable motion detection to enable this function.

Figure 6-2 Configuring Motion Detection Settings

56
on the right of the window name.